Part II to Reader's Question- Eyeglass Holders
You will need: piece of craft fur, craft foam, marker and ruler, buttons, sewing needle and strong thread, fabric and foam glue and clothes pins.
Cut foam into 6 x 6 1/2 inches
Place the fur side down on the table and glue on foam piece. The foam piece should lay flat on the bottom edge and should lay long wise.
Mark 2 dot on the foam. 2 inches up from the lower edge and 2 1/4 inch from the edge.
Use the buttons as a guide and cut 2 holes in the top flap. Make sure the holes are large enough for the buttons to fit through.
Fold over top flap and push through buttons.
I think these would also make great presents for grandparents or any one who wears glasses or sunglasses.
Comments